View LTPA-A5630AZL40_8850716.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lite-on dcc release lite-on technology corp. / optoelectronics no.90,chien 1 road, chung ho, new taipei city 23585, taiwan, r.o.c. tel: 886-2-2222-6181 fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto light ledproduct data sheetltpa-a5630azl spec no.: ds25-2014-0224effective date: 11/01/2014revision: - bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4
1 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 1. description the l iteon 5630 product series is a wide beam angle standard - dimension package , combining the lifetime and reliability advantages of light emitting diodes with the brightness of conventional lighting. it gives you total design freedom and un matched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies . 1.1 features ? package in 8 mm tape on 7" diameter reels. ? compatible with automatic placement equipment. ? compatible with infrared and vapo r phase reflow solder p rocess. ? eia std package. ? i.c. compatible. ? meet green product and pb - free(according to rohs) 1.2 applications ? automotive aftermarket eg: drl, reading light 1.3 available part numbers cct part number 6500 k lt pa - a 5630azl 65 5700 k lt p a - a 5630azl 57 5000 k lt pa - a 5630azl 50 4000 k lt pa - a 5630azl 40 3500 k lt pa - a 5630azl 35 3000 k lt pa - a 5630azl 30 2700 k lt pa - a 5630azl 27
2 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 2 . outline dimensions part no. lens color source color lt pa - a 5630azl 65 orange ingan blue lt pa - a 5630azl 57 lt pa - a 5 630azl 50 lt pa - a 5630azl 40 lt pa - a 5630azl 35 lt pa - a 5630azl 30 lt pa - a 5630azl 27 note s: 1. all dimensions are in millimeters. 2. tolerance is 0.2 mm (.008") unless otherwise noted.
3 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 3 . absolute maximum ratings at t a =25c parameter symbol cod e4 rating unit power
d i ssipation p o 700 mw continuous forward current i f 200 ma pulse forward current pulse forward current i f p 24 0 ma operating temperature range t c - 40 ~ +8 5 c storage temperature range t stg - 40 ~ +100 c junction temperature t j Q 120 c electrostatic discharge threshold hbm 2k v thermal resistance rth, j - c 15 c/w notes : 1. 1/10 duty cycle, pulse width 100 s. 2. forbid to operating at reverse voltage condition for long. 3. it is recommended to follow de - rating curve to u se maximum rating to ensure led can operated normally. 4. all correlation data is mounted on thermal heat sink with 2cmx 2cm metal core pcb 5. the tc point is defined as following figure .
4 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 4.1 typical performance parameter symbol values unit test condition min typ. max correlated color temperature cct 2700 -- 6500 k i f = 12 0ma luminous flux 1 v 41 -- 63 .5 lm i f = 12 0ma color rendering index cri 80 -- -- - i f = 12 0ma viewing angle 2 1/2 -- 120 -- deg forward voltage v f 2.9 3.13 3.3 v i f = 12 0ma notes 1. luminous flux is the total luminous flux output as measured with an integrating spher e. 2. iv (flux ? v ) classification code is marked on each packing bag. 3. the chromaticity coordinates (x, y) is derived from the 1931 cie chromaticity diagram. 4. caution in esd: static electricity and surge damages the led. it is recommended using a wrist band or anti - electrostatic glove when handling the led. all devices, equipment and machinery must be properly grounded. 5. cas140b is the test standard for the chromaticity coordinates (x, y) & ? v . 6. the chromaticity coordinates (x, y) guarantee should be added +/ - 0.01 tolerances 7. cri measurement allowance is 3 4 . electro - optical charac teristics
5 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl forward current vs. lumen and voltage
6 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 4.2 relative spectral power distribution at typical current 4.3 radiation characteristics 3000k 25degc 25degc 85degc 85degc 5 000k 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% relative intensity (%) 90 60 30 0 50 100 60 30 0
7 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 4.4 forward current vs. for ward voltage 4.5 forward current derating c urve vs . operating temperature (tc) 4.6 relative intensity vs . operating temperature (tc)
8 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 5 . binning definition 5.1 color bin
9 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 5.2 color rank i f = 12 0 ma rank - x y rank - x y rank - x y k 1 0.3028 0.3304 j 1 0.3207 0.3462 h 1 0.3376 0.3616 2 0.3068 0.3113 2 0.3222 0.3243 2 0.3366 0.3369 3 0.3221 0.3261 3 0.3366 0.3369 3 0.367 0.3578 4 0.3205 0.3481 4 0.3376 0.3616 4 0.3736 0.3874 5 0.3028 0.3304 5 0.3207 0.3462 0.3376 0.3616 g 1 0. 3736 0.3874 f 1 0.3996 0.4015 e 1 0.4299 0.4165 2 0.367 0.3578 2 0.3889 0.369 2 0.4147 0.3814 3 0.3898 0.3716 3 0.4147 0.3814 3 0.4373 0.3893 4 0.4006 0.4044 4 0.4299 0.4165 4 0.4562 0.426 5 0.3736 0.3874 5 0.3996 0.4015 0.4299 0.4165 d 1 0.4562 0.426 2 0.4373 0.3893 3 0.4593 0.3944 4 0.4813 0.4319 5 0.4562 0.426 t olerance on each hue bin ( x,y) is +/ - 0.01 .
10 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 5.3 flux bin 2700k ? v luminous flux spec. table ? 4 000k ? v luminous flux spec. table ? ? v bin ? lumen (lm) at i f = 12 0 ma ? v bin ? lumen (lm) at i f = 12 0 ma min max min max cf 4 1.0 4 5 .5 eh 4 4.0 4 8.5 fi 4 5 .5 5 0.0 hk 4 8.5 5 3.0 il 5 0.0 5 4.5 kn 5 3.0 57 .5 lo 54.5 59.0 nq 57.5 62.0 3000k ? v luminous flux spec. table ? 50 00k ? v luminous flux spec. table ? ? v bin ? lum en (lm) at i f = 12 0 ma ? v bin ? lumen (lm) at i f = 12 0 ma min max min max dg 42.5 47. 0 fi 45. 5 50.0 gj 47. 0 5 1 .5 il 50.0 5 4.5 jm 5 1 .5 5 6.0 lo 5 4.5 59 .0 mp 56.0 60.5 or 59.0 63.5 3500 k ? v luminous flux spec. table ? 5 7 00k ? v luminous fl ux spec. table ? ? v bin ? lumen (lm) at i f = 12 0 ma ? v bin ? lumen (lm) at i f = 12 0 ma min max min max eh 4 4.0 4 8.5 eh 4 4.0 4 8.5 hk 4 8.5 5 3.0 hk 4 8.5 5 3.0 kn 5 3.0 57 .5 kn 5 3.0 57 .5 nq 57.5 62.0 nq 57.5 62.0 ? 6500k ? v luminous flux spec. table ? ? ? v bin ? lumen (lm) at i f = 12 0 ma min max dg 42.5 47. 0 gj 47. 0 5 1 .5 jm 5 1 .5 5 6.0 mp 56.0 60.5 tolerance on each luminous flux bin is 10%
11 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl code lm 2700k 3000k 3500k 4000k 5000k 5700k 6500k n o eh hk kn dg gj jm gj jm kn fi il lo nq nq il eh hk 53.0 eh hk kn 54.5 56.0 57.5 h cct c d e f g cf fi dg 60.5 62.0 i 41.0 42.5 44.0 45.5 47.0 i f =120 ma j 50.0 51.5 48.5 63.5 59.0 k p q mp lo mp nq or r l m
12 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 5.2 voltage bin v f spec. table v f bin forward voltage (volts) at i f = 12 0ma min max v1 2.9 3.1 v2 3.1 3.2 v3 3.2 3.3 tolerance on each forward voltage bin is +/ - 0. 1 v 6. bin code list example: v1 / hk / g forward voltage rank luminous flux rank color rank v1 hk g
13 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 7. r eflow solderi ng characteristics profile feature lead free assembly average ramp - up rate (t smax to t p ) 3c / second max preheat temperature min (t smin ) 150c preheat temperature max (t smax ) 200c preheat time (t smin to t smax ) 60 C 180 seconds time maintained abo ve temperature (t l ) 217c time maintained above time (t l ) 60 C 150 seconds peak / classification temperature (t p ) 260c time within 5c of actual peak temperature (t p ) 5 seconds ramp C down rate 6c / second max time 25c to peak temperature 8 minutes max
14 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl notes: 1. the leds can be soldered using the reflow soldering or hand soldering method. the recommended hand soldering condition is 350 c max. and 2 secs max. for one time only, and the recommended reflow soldering condition is 260 c max. and 5 secs max. for three times max. 2. all temperatures refer to topside of the package, measured on the package body surface. 3. the soldering c ondition referring to j - std - 020 . the storage ambient for the leds should not exceed 30 c temperature or 70% relative hum idity. it is recommended that leds out of their original packaging are soldered within one week. for extended storage out of their original packaging, it is recommended that the leds were stored in a sealed container with appropriate desiccant, or desiccat ors with nitrogen ambient. if the leds were unpacked more than 168hrs, baking the leds at 60 for 60 mins before soldering process. 4. the soldering profile could be further referred to different soldering grease material characteristic. the grease vendor will provide this information. 5. a rapid - rate process is not recommended for the leds cooling do wn from the peak temperature. 6. although the recommended reflow conditions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the leds. 7. liteon cannot make a guarantee on the leds which have been al ready assembled using the dip soldering method.
15 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 8. reliability test no test item test condition duration number of damaged 1 high temperature storage (hts) 100 1000 hrs 0/20 2 low temperature storage (lts) - 40 1000 hrs 0/20 3 thermal cycle - 40 ~100 30min dwell 5min transfer 200 cycle 0/20 4 thermal shock - 40 ~100 20min dwell 20sec transfer 200 cycle 0/20
16 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 9 . user guide ? cleaning do not use un specified chemical liquid to clean led they could harm the package. if cleaning is necessary, immerse the led in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. ? recommend printed circuit board attachment pad infrared / v apor phase reflow soldering ? package dimensions of tape note: all dimensions are in millimeters (inches).
17 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl ? package dimensions of reel notes: 1. empty component pockets sealed with top cover tape. 2. 7 inch reel - 30 00 p ieces per reel. 3. minimum packing quantity is 500 pieces for remainders. 4. the maximum number of consecutive missing lamps is two. 5. in accordance with eia - 481 specifications.
18 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 10. cautions 10.1 application the leds described here are intended to b e used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).consult liteons sales in advance for information on applications in which exceptional reliability is required, particularly when the fa ilure or malfunction of the leds may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 1 0 . 2 storage t his product is qualified as moisture sensitive l evel 3 per jedec j - std - 020 precaution when handing this moisture sensitive product is important to ensure the reliability of the product. the package is sealed : the leds should be stored at 30 c or less and 90 % rh or less . and the leds are limited to use w ithin one year, while the leds is packed in moisture - proof package with the desiccants inside. the package is opened : the leds should be stored at 30 c or less and 60 % rh or less . moreover , the leds are limited to solder process within 168 hrs. if the humi dity indicator shows the pink color in 10% even higher or exceed the storage limiting time since opened, that we recommended to baking leds at 60 c at least 24hrs. to seal the remainder leds return to package, it s recommended to be with workable desiccant s in original package. 1 0 . 3 cleaning use alcohol - based cleaning solvents such as isopropyl alcohol to clean the led if necessary. 1 0 . 4 drive mode an led is a current - operated device. in order to ensure intensity uniformity on multiple leds connected i n parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each led as shown in circuit a below circuit model a circuit model b
19 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl (a) recommended circuit. (b) the brightness of each led might appe ar different due to the differences in the i - v characteristics of those leds. 1 0 . 5 esd (electrostatic discharge) static electricity or power surge will damage the led. suggestions to prevent esd damage: use of a conductive wrist band or anti - electrostatic glove when handling these leds. all devices, equipment, and machinery must be properly grounded. work tables, storage racks, etc. should be properly grounded. use ion blower to neutralize the static charge which might have built up on surface of the leds plastic l ens as a result of friction between leds during storage and handling. esd - damaged leds will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or no lightup at low currents.to verify for esd damage, ch eck for light up and v f of the suspect leds at low currents.the v f of good leds should be >2.0v@0.1ma for ingan product and >1.4v@0.1ma for alingap product. 10.6 suggested c hecking l ist : training and certification 1. everyone working in a static - safe area is esd - certified? 2. training records kept and re - certification dates monitored? static - safe workstation & work areas 1. static - safe workstation or work - areas have esd signs? 2. all surfaces and objects at all s tatic - safe workstation and within 1 ft measure less than 100v? 3. all ionizer activated, positioned towards the units? 4. each work surface mats grounding is good? personnel grounding 1. every person (including visitors) handling esd sensitive (esds) items wear wrist strap, heel strap or conductive shoes with conductive flooring?
20 / 20 part no. : ltpa - a5630azl bns - od - fc002/a4 light led ltpa - a5630azl 2. if conductive footwear used, conductive flooring also present where operator stand or walk? 3. garments, hairs or anything closer than 1 ft to esd items measure less than 100v*? 4 . every wrist strap or heel strap/conductive shoes checked daily and result recorded for all dls? 5. all wrist strap or heel strap checkers calibration up to date? note: *50v for blue led. device handling 1. every esds items identified by eia - 471 labels o n item or packaging? 2. all esds items completely inside properly closed static - shielding containers when not at static - safe workstation? 3. no static charge generators (e.g. plastics) inside shielding containers with esds items? 4. all flexible conductive and dissipative package mate rials inspected before reuse or recycle? others 1. audit result reported to entity esd control coordinator? 2. corrective action from previous audits completed? 3. are audit records complete and on file? 1 0 .7 others: do not pu t any pressure on the light emitting surface either by finger or any hand tool and do not stack the products. stress or pressure may cause damage to the wires of the led array. this product is not designed for the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions do not use sulfur - containing materials in commercial products including the materials such as seals and adhesives that may contain sulfur. d o not put this product in a place with a lot of moisture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (cl, h 2 s, nh 3 , so 2 , no x , etc.), exposure to a corrosive environment may affect silver plating. the appearance and specific ations of the product may be modified for improvement without prior notice.

▲Up To Search▲

Price & Availability of LTPA-A5630AZL40

	To Download LTPA-A5630AZL40 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .